Flame Retardant Workwear Process Components

Flame-retardant clothing with fabric, the fabric of the flame-retardant fiber so that the fiber burning speed greatly slowed down, immediately after the fire source to go out on their own, and the burning part of the rapid carbonization without melting, dripping or piercing, giving time Evacuate the burning site or take off the body of burning clothes, reduce or avoid burns burns, to protect the purpose. The top of the formskills requirement
First, surface materials
1. Fabric appearance quality (flame retardant fabric) flame retardant clothing with fabric, the fabric of the flame-retardant fiber so that the burning of the fiber greatly slowed down, immediately after the fire away from their own extinguished, and the burning part of the rapid carbonization without generating Melting, dripping or piercing, giving people the time to evacuate the burning site or take off the body of burning clothes, reduce or avoid burns burn, to protect the purpose.
2. Accessories
A. All the accessories on the clothing (such as buttons, hooks, zippers, etc.) should not be made of materials that should not be fusible, flammable and easily deformable, and should not be used if the surface is required to use flame retardant clothing Blanket
Hiding
B. Metal parts should not be in direct contact with the body Metal parts should not be in direct contact with the body. If the use of rubber-like materials, cladding materials must be flame retardant. Must use the material when the metal parts should not be in direct contact with the body asked not to melt material.

C. The use of reflective tape and other ingredients, ingredients must be flame retardant materials, reflective belt with the reverse reflection coefficient CB 20653-2006 6.1 in more than 2 grade reflective material requirements, flame retardant performance in line with the relevant requirements of this part.
Flameproof overalls
Second, clothing
Finished clothing accessories should meet the above flame retardant clothing materials technical requirements.
1. appearance quality
Clothing appearance should be no damage, spots, dirt and other effects of wearing defects.
2. Style
Style simple, practical, beautiful, should be selected in the following styles;
A.
B. Underwear (cap) Siamese and so on.
3. structure
⑴ safety, health, is conducive to the normal physiological requirements and health;
⑵ to adapt to physical activity when the job, easy to wear off. Wear size requirements loose.
⑶ Ming pocket must bring bag cover; coat length should cover the top 20 cm above the trousers; cuffs, feet, collar receivable mouth, bag length should be greater than the length of the bag 2 cm. Pants on both sides of the pocket can not use oblique inserted bags, to avoid the province, live fold up, so as not to splash the molten metal, sparks into or accumulation.
⑷ in the operation is not easy to cause hook, hang, twist, grind.
⑸ in the appropriate place can be left to breathe pores in order to sweat and moisture regulation of body temperature, but ventilation pores shall not affect the clothing strength. The pore structure must not allow foreign objects to enter the interior of the garment.
4. Specifications According to the protection requirements, style and aptamer reference GB / T13640 in the control site, set the finished product size, clothing size measurement location should meet the FZ / T81007 specifications, size limit deviation according to different models refer to the following table, Can be self-determined.
Sewing
A. Pitch
B. Clothing parts of the sewing line straight, tidy, flat service firmly; up and down elastic appropriate, no jump needle, broken line, starting needle should be back needle.
C. Trademark location dignified, type standard clear, correct.
D. Sleeve rounded
E. Collar flat clothing is not Alice, collar part of the line can not have wiring.
F. All exposed joints should be all seam, all parts of the seam is not less than 0.8 cm.
G. Pants after sewing with double or chain stitching.
H. The eye is not offset, the keyhole stitching beautiful, neat, flat service.
I. Symmetrical, component positioning accuracy, and so on.
2. Lining cotton, cotton fabric clothing can be deposited hot melt adhesive lining; for collar, noodles, sleeves, hem, trousers waist, bag and other parts. Polyester, cotton fabric can be deposited hot melt adhesive lining; for collar, noodles, sleeves, hem, trousers waist, bag and other parts. Dressing parts do not infiltration glue, washed 20 times without blistering, not delamination. Dressing parts do not infiltration glue, washed 20 times without blistering, not delamination. 20 does not blister
4. Packaging storage
A. / Sets of clothing should be: name, trademark, type specifications, factory name and so on.
B. Each set of products with a certificate
C. Each set of products with product description and the relevant national standards or industry standards must have the logo or mark.

Xinxiang City Yulong Textile Co., Ltd. was established in 2002, over the years focused on the production of flame retardant, fluorescent-oriented variety of functional fabrics and security clothing. The company has afunctional fabric factory and protective clothing factory, as the domestic functional textile industry leader, Yu Long textile more groundbreaking integration of its fabric and clothing two factories of the advantages of resources, effort to build functional fabrics and clothing Station service center.